Shanghai Kangquan Valve Co., Ltd.

-Anti-blowout Structure of Valve Stem
When medium pass through the valve, the pressure in valve body may possibly push the stem
out, or when the valve is in repair, if there is pressure in the middle cavity, the stem or medium
seems to easily fly out upon disassembling the valve, which can cause injures to human
beings, To prevent the possibilities, a dummy club is packing and thrust bearing are burnt or
packing is damaged due to other causes, the pressure of medium in valve body will make the
dummy club of valve stem in close contact with the upper seal face of valve body. Thus
to prevent medium leaking out from the damage packing position.
-Reliable Seal Structure
The seat is made of PTFE. Because the contact area between seat and the ball will becomes
more high with rising of pressure of the middle cavity, Small Resistance ball valve has the
smallest resistance of all the valve, in the case of reduced bore, the resistance is little still.
-Prompt switch
The ball valve circumrotates in 90^o, It work quickly to open or close.